TPOVU
User access upgraded!0User security level incorrect - no changes made!U
=<?u9
Connected at 
 baud.
Connected - press <ENTER>
Lost carrier
S-LOGIN
This is 
 calling you back."Please enter your login password: 
S-VALID!Callback verification successful!,Long distance callback verification complete
Callback verification complete
Incorrect.
Incorrect password: 
Disconnecting...
Callback verification failureU
S-LONGD4Sorry, your phone number is long distance from here.&User is long distance, can not verify!U
PHONENUM.CTL
S-TRASH)You have entered an invalid phone number.*Number found in PHONENUM.CTL - not dialed!
PHONE#.CTL&Sysop error - verifier not configured!)Configuration error - PHONE#.CTL missing!
User entered same number as "Duplicate phone number not called.
S-DUPE=Sorry, another user has already verified at that phone numberU
S-INTRO
QuickBBS callback verifier
Line 1 number: 
Line 2 number: 0Which line should I call back on (<Q> to quit)? 
-Is this the correct number to call you back? 
-Callback verify attempt - phone number wrong?
One moment please...
Verifying user at 
S-DISC"The system will now call you back.,When your phone rings, answer by typing ATA.
Dialing 
Sysop:  Press ^A to abort dial
Sysop aborted callback!
Aborted...
RINGING
Ringing...
Busy - verification failure
NO CARRIER!No carrier - verification failure
VOICE#Voice answer - verification failure
CONNECT
Unexpected modem response: .Local test mode - press any key to continue...U
	9	>	C	S	k	
1Node chat is not supported in the overlay versionU
$There are no messages on the system.
There are currently 
 active messages on the system.&The system has messages numbered from 
..Enter message number to delete, [Enter]=Quit: #Searching Messages, Please Wait ...$Sorry, but that is not your message!!Message has already been deleted!U
Press S to Stop or P to Pause.
OFF *Sorry, no available message boards to you.8Enter Board Number(s) to toggle, Each separated by Space:ON-toggles all on, OFF-toggles all off, <CR>-quit and save
Saving Combined settings.
User assigned combined record #U
5Enter Board Number to Change to, or [Enter] to Quit: 
Press S to Stop or P to Pause.*Sorry, no available message boards to you.U
	L	{	
PVTUPLD.LOG
Filename:    
Uploader:    
Date/Time:   
Description: U
Xmodem	Xmodem 1K
Ymodem
Ymodem-G
SEAlink
Zmodem
NoneU
 9File transfer operations require at least a baud rate of 
DNLDHRS
hh:mm*Sorry, downloads are only allowed between 
 and 
Enter Password to Download: 
WP$Attempted Password Download on Menu 
Invalid Password!
*F+System Error:  Invalid file area specified!3Sorry, you do not have download access to this area
File not found.
Enter Filename to Download: 
U Invalid Filename!  Try again ...
RATIOK3That would exceed your allowed download K ratio of 
RATIO-That would exceed your allowed file ratio of 6Daily download limit would be exceeded with this file.
Filename:       
Size of File:   
 Blocks / 
 Bytes
Transfer Time:  	 Minutes 
 Seconds at 
 Baud
Protocol:       1Sorry, not enough time remaining for download ...,Ready to send file, press <Ctrl-X> to abort.
	Download- File transfer request completed.(File transfer request was not completed.MMultiple files may be sent, enter each filename to send separated by a space./Enter filename(s) to send (wildcards are valid)
>  An invalid filename was entered!
One moment ...
QBBSXFER.INF
:Daily download limit would be exceeded with this transfer.
No files to send.
Files Requested:   
Size of Transfer:  
 Blocks
Transfer Time:     
 Minutes
 Seconds
 baud
Protocol:          'Not enough time remaining for download.'Ready to send, press <Ctrl-X> to abort.
No files were sent.
One file sent successfully.
 files out of 
 sent successfully.
All files sent successfully.U
*F+System Error:  Invalid file area specified!+Sorry, uploads are not allowed in this area	FILES.BBS
One Moment ...!Not enough free space for upload!<
Enter Upload Filename: 
U Invalid filename!  Try again ...
] already exists here!
Attempted duplicate upload of +Please enter a description for your upload.=Begin description with a slash (/) if file is for Sysop only.
> .Description must be at least three characters!
File Name:   
Drive Space: 
 Bytes Free / 
 Bytes Total
Protocol:    /Ready to receive file, press <Ctrl-X> to abort.
Upload not completed ...
Upload-
Thanks for the upload!
  @Ready to receive file(s), press <Ctrl-X> several times to abort.
QBBSXFER.INF
Q$$$TEMP.INF
 duplicate file(s) deflected.
No files received.
One file received.
 files received.F                             [---------------------------------------]
Q$$$TEMP.INF!
Error:  Unable to open 
Please Describe 
U"e"z"
#2#C#X#]#b#~#
$<$J$O$W$
%&%.%?%J%O%d%i%
&#&3&D&I&S&\&}&
'!'&'0'9'G'V'd'l'
(#(.(9(>(M(
) ),)1)K)U)`)h)m)r)|)
*#*6*@*S*X*b*k*y*
+)+M+X+g+
,7,A,F,P,U,r,|,
-.-3-=-N-S-X-l-q-v-
-4.9.Q.[.d.{.
/#/8/B/G/Q/V/d/i/n/~/
0&0+050K0Z0
1.181=1
&Sending SYSTEM.LOG Messages to Printer
Logging User On-Line
EXITINFO.BBS	 missing!
 corrupted!!Return from DOS Exit (Local Mode)
Return from DOS Exit (
 Baud)
Local Operation Only
14400
19200
38400
External Caller at 
 Baud3Invalid Baud Rate Specified or Caller Disconnected!
mm-dd-yy
01-01-80
Scheduled Event in 
 Minutes at 
hh:mm%Exiting After Caller at ERRORLEVEL = U
>hA@8u
>hA`	w
-<Lu)
Lpt Active:
QuickBBS 2.75 OvrP
                                                                              
                Press [L] to logon locally or [ESC] to exit                   
Status:
Time:
Date:
Memory available:        Bytes
Last System Caller:
Active Messages:
Total System Calls:
Next Event:U
Initializing the Modem
(Carrier Present, dropping Connection ...
Modem Init Failure, Retrying/Unable to initialize modem correctly, Exiting..U
hh:mm
 at errorlevel 
Waiting for CallU
Taking Modem Off-Hook
Try #
 - Failure&Failed to Send Off-Hook Command StringU
%Executing Event at errorlevel set to 
Executing event at errorlevel 
Calls disabled, event upcoming.
Thinking...
Local Logon
Answering the phone
Modem timeout
Carrier Detected, Incoming Call
Connected at 
 Baud
Modem Never Reported Baud Rate
Caller DisconnectedU
#Thanks for using QuickBBS 2.75 Ovr!U
Connected at 
 Baud+High-Speed Call Detected, Buffering Enabled
ANSI detected on remote system!
QuickBBS, Version 2.75 Ovr
Evaluation
 key expires in 
 days
TOOSLOW
Sorry, you must logon at 
 baud or higher.
Connect rate too slow
NO300
hh:mm.Sorry, 300 baud access only available between 
 and 
Your Evaluation key expires in 
"What is your first and last name? 
What is your Last Name? -You must enter both your first and last name!
;!You must enter at least one name!3Since you cannot remember your name, access denied!
Name retry count exceeded
Scanning User File ...
 on-line from console
 on-line at 
Entered invalid name "All"
Access Denied!
Access denied
TRASHCAN.CTL
Name found in TRASHCAN.CTL
TRASHCAN
Password: 
 on-line locally (fast-logon)
Invalid Password: "
Invalid password!%Would you like to leave a message to 
Name not in user file!
NOTFOUND2Your name was not located in the system user file.
Name Entered: !Did you enter your name correctly
Re-entering user name ...
PRIVATE7* This is a private system, new users are not allowed *
Private System Message Given
New users not allowed
NEWUSER1*Where are you calling from (City, State)? ,What town or province are you calling from? &Would you like ANSI color and graphics.Do you want to use the ANSI full-screen editor How many lines per screen page? .Would you like to pause after each screen page,Do you want screen clearing codes to be sent
home/voice
DATAPHON
business/data
PASSWORD
Enter your password to use: -Please type password again for verification: &Passwords do not match!  Try again ...1Did you enter all the above information correctly'Checking phone numbers, please wait ...IWARNING: Duplicate Business/Data Phone Number Entered, Sysop notified ...
PHONEDUP.LOG1 entered duplicate Business/Data phone number as 
The phone number was FWARNING: Duplicate Home/Voice Phone Number Entered, Sysop notified .... entered duplicate Home/Voice phone number as 
NEWUSER2
NEWUSER
Real name is 
One moment ...
User security level=
 minutes remaining.
QUICKED.ASW
    (Line 
) answered5You can not call more than one node at the same time!
Multiple logon attempt
WELCOME
BIRTHDAY
Returned from DOS Exit at 
mm-dd-yy
One Moment ...
EXITINFO.BBS
DORINFO1.DEFU
	N	m	
(@(N(Y(g(
)")9)K)P)Z)_)p)u)
***/*4*=*S*X*a*q*v*{*
+2+J+T+e+j+t+y+
,%,8,`,q,
---9-C-e-
.(.?.N.c.
/./</X/z/
0%040I0X0m0|0
1%1=1G1L1_1i1{1
2!2&2A2F2K2b2g2v2
3 3+3H3M3\3d3
4 4%434A4K4
5(53585K5[5v5
626D6X6
767H7p7
9!9-9=9B9L9m9|9
:&:1:B:K:v:
;$;1;?;J;O;T;f;s;~;
<(<-<F<S<a<l<q<v<
=1=;=@=s=x=
> >%>/>@>E>O>T>Y>y>
?,?A?n?y?~?
@9@>@W@u@
A&A+A0A>AFAVA`AeAuA
PVTLINE3Sorry, you are not authorized to call on this line."Not authorized for access on line U
Available Message Boards:
Press S to Stop or P to Pause.
Which Message Board (1-
)? 3You do not have Sysop access on that message board!
Make this message private?
Moved message #
 to Board #
Message moved to Board #
7Do you wish to forward this message through the network*Enter Name of User to Forward Message to: 
All$Verifying User Name, Please Wait ...
Sorry, 
 is not a user of this system.
Kill message after sent
Send Message Crash Priority
* Original: FROM: 
* Original: TO:   
* Forwarded by 
* Forwarded Using QuickBBS 
2.75 Ovr
* Forwarded at 
 	Message #
 forwarded to 
Message forwarded.U
* Received *U
FMPT 
TOPT U
	Message #
 (DELETED)
 (PRIVATE)
 (RECEIVED)
 (KILL)
 (SENT)
 (F'ATTACH)
 (CRASH)
 (RECEIPT REQ)
 (AUDIT REQ)
 (RETURN RECEIPT)
Date: 
From: 
, Unlisted Node
, 	Point of 
To:   
Encl: 
Subj: 
Previous Reply is Message #
Next Reply is Message #U
SEEN-BY:'Error in Header file - Text unavailableU
*M*Sysop Error:  Invalid Message Board Number4Sorry, there are no message boards available to you!C****  Authorization must be given for access to message board  ****0There are currently no messages in this section.
Combined9[F]orward Order    [R]everse Order      [I]ndividual Msgs9[N]ew Messages     [S]elected Messages  [M]arked Messages![H]elp             [Q]uit (Abort)
Option: 
FRINSMHQ)[F]rom Name  [T]o Name  [S]ubject  [Q]uit
Field to Search by? 
Enter Search String: 
READHELP
Active Message Board: "
 active messages)
System has messages numbered 
First
Last"Enter number to start at, [Enter]=
: $Enter number to read, [Enter]=Quit: 'There are currently no marked messages.!Mark messages for later retrieval
Pause after each message3Press N for next message, S to stop, or P to pause."Scanning messages, please wait ...
No new messages found
No messages found7#     To                   From                 SubjectI----- -------------------- -------------------- -------------------------
UMFH!
Mark: [Y]es, [N]o, [S]top? 
[-] Read Previous Replies
[+] Read Replies
[Q]uit Reading Replies
[A]gain [N]ext [B]ack 
[R]eply 	[D]elete *[H]idden [!]Private [U]nread [M]ove [F]wd 
[X]port 
[S]top? 
Returning to Original Message 
Message now 
PRIVATE.
PUBLIC.
Export Message to Printer
Enter Full Output Filename: 
Invalid filename!5File already exists - [A]ppend, [O]verwrite, [Q]uit? 
Unable to append file!
Exporting Message #
Message number 
 in "
Date: 
From: 
To:   
Subj: 
Unable to create 
!1* End of Replies, Returning to Original Message *
End of messagesU
@<Ou5
 $ . = \ f u 
!<!F!U!
"!"0"}"
#3#8#G#
$7$H$R$a$
$-%=%G%V%
&*&4&N&S&b&
'&'5'R'c'm'|'
(8(Z(p(
)A)K)Z)r)|)
)"*4*E*|*
*#+R+
-3-=-Y-
.+.7.
/./3/=/Q/V/`/t/y/~/L6
767N7\7j7x7
878<8T8g8z8
8,9?9U9e9t9
:@:c:s:~:
;&;<;L;W;a;u;
<#<(<2<C<H<R<[<t<
='>5>@>X>p>z>
?%?=?K?n?x?
@;@F@O@j@x@}@
A+A;ATAbA|A
B.B<BFBLBvB
C)CICNC]CeCyC
D*D2D7DEDaDqDvD
E/E4EEEJEYEaE
F#F2FTF\FnF
G!G1G6G@GEGWGoGtG
H)H.H3HEHRH_HlHqHvH
IdIlI|I
I"J'J,JDJZJnJsJ
KZK_KdKnKsKzK
L"L2LDLIL
00:00
01-01-80U
	Subject? 
&Enter "ALL" if message is to everyone.
Who is this message to? 
Sysop4You can not enter a message to the Sysop in an echo!
All+You can not enter a private message to ALL!
Searching user list for 
, one moment ...
Sorry, $ is not a valid user of this system.U
Private MessageU
Kill message after sentU
Attach file(s) to message	File(s): 
Could not find 
, Try again or [Enter] to exitU
Send message via crash mailU
Only two lines left!
This is your last line ...
Message is full!U
Enter Line Number to Delete (1-
Line #
 Reads:
Delete this line
 deleted from message.U
Enter Line Number to Edit (1-
Line #
 Reads:
Old String? 
" was not found in line #
New String? 
" is too long to fit in line #U
Enter Line Number to Format (1-
[C]enter Line
[R]ight Justify
[L]eft Justify
[A]bort Format Function
Format Command: 
CRLAU
><Lu:
&Enter Line Number to Insert Before (1-
): <Please enter the line to be inserted or blank line to abort.
Text inserted before line #
Press S to Stop or P to Pause.
 Enter Line Number to Replace (1-
): #Enter the text to replace line with
Line #
 replaced.U
 * Origin: 
TOPT 
FMPT 
MSGTMP
Unable to open: 
Message not saved.
	Message #
 entered in Msg Area #
(Used alias "
USERON.BBS
New mail from 	 on node 
Press [Enter] to continue
Updating reply chain...
Creating reply chain...!Adding message to reply chain ...U
MSGTMP
In a message to 
 wrote:
Use an alias!Enter Name to Post Message With: 
$Searching User List, Please Wait ...
Sysop
System Operator%You cannot use another person's name!U
Change anything? 
Who To  : 
Subject : 
+[A]ccept  [T]oggle WhoTo  [R]edo  [Q]uit : 
*M1>> System Error:  Invalid Message Board Number <<*Sorry, no message boards available to you!
)>> System Error:  Missing Board Number <<@>>  Authorization must be granted for access to message board <</>> System Error: Nodelist files are missing! <<
Re: 'You do not have enough credit to reply!$WARNING:  Replying to unlisted node!
Would you like to continue
Quoting Reply Text ...
Loading Editor ...
MSG.INF
Private
Public
EXITINFO.BBS
DORINFO1.DEF
Lost carrier
Saving your message...
Message aborted.
Error executing editor - code 
MSGTMP
PRIVATE
PUBLIC
This will be a 
 message to 
.E    Enter message text now (66 lines maximum/72 characters per line).J    Words will wrap automatically.  Enter blank line to edit/save message.;[C]ontinue,  [D]elete,     [E]dit,  [F]ormat Line   [H]elp!:[I]nsert,    [J] Subject,  [L]ist,  [R]eplace Line  [S]ave
[Q]uit
Editor Command: 
CDEFIJLRSHQ
Message is empty!
Message is full!#Continue to add text to message ...
EDITHELP
Abort messageU
 . 3 : ? N V e j q v 
!"!*!6!F!W!\!f!z!
"""'"B"J"["k"p"
###.#3#F#S#`#n#y#~#
$9$c$h$x$
%%%*%7%<%K%S%d%i%x%
&*&7&D&Q&\&i&v&
(+):)N)\)a)f)
+ +(+6+E+r+
-4-C-S-a-
2=2L2\2p2
3&3E3
3<4Q4V4f4n4
5!5+5D5
60656F6`6}6
7g7l7z7
8&8>8P8U8d8w8
909:9?9J9O9b9g9l9
:-:A:K:P:`:j:o:
;';9;N;l;~;
< <)<.<<<J<a<t<
='=@=E=
MSGID: 
#Message base is write locked, retry
Operation aborted.U
Are you sure
Updating User Credit for 
* Deleted *
Removing Message #
 from reply chain ...	Message #	 deleted.
 DeletedU
NETMAIL.BBS
ECHOMAIL.BBSU
		 	1	6	@	I	Y	j	o	y	~	
SYSINFO.BBSU
TIMELOG.BBSU
Checking for your new mail... $You have the following mail waiting:
Messages          AreaL---------         ----------------------------------------------------------
	Total of 
 message
s in 
 area
.4These messages have been marked for later retrieval.
Read Messages NowU
XFERHELP
.ASC	X) Xmodem
1) Xmodem-1k
Y) Ymodem (Batch)
G) Ymodem-G
S) SEAlink	Z) Zmodem
<H>elp with Protocols
<E>xit to Menu
Select Protocol: U
System Operator
SYSINFO.BBSU
TIMELOG.BBSU
  Creating/Rebuilding Index Files
MSGINFO.BBS
MSGTOIDX.BBS
MSGIDX.BBS
* Received *
* Deleted *U
	USERS.BBS
 Creating new User File	ALIAS.BBS&Alias file not found, creating new one
MSGHDR.BBS(
SHARE violation opening message files!
&SHARE violation opening message files!
 Creating Message Header File
MSGTXT.BBS
 Creating Message Text File
MSGINFO.BBS
MSGTOIDX.BBS
MSGIDX.BBSU
Missing U
Unlisted	Somewhere
Unknown Sysop
List of nodes in Zone 
, Net/Region 
 cents
<Enter Net or Region Number to Change to, [Enter]=No Change: 
Invalid Net or Region Number!U
2Press <S> to stop display or <P> to pause display.)Current list of Nets and Regions in Zone 
REGION 
NET    U
3Enter Zone Number to Change to, [Enter]=No Change: 
Invalid Zone Number!U
S to stop or P to pause.
Current List of Zones:
ZONE 
%You don't have enough netmail credit!
 - Point of 
 cents
Is the destination correctU
There is no 
 in the nodelist!U
Current Net/Region: 
, ;Type node address, net/node address, zone:net/node address,<L to list nodes, Z to change zone, or C to change net/region
Selection: 
Continue
Invalid Node Address!U
NODEINC.DAT
NODEIDX.DATU
	>	K	]	
 H j 
!n!}!
";"J"U"g"|"
#L#V#[#i#n#
	ALIAS.BBSU
: Reformatting Last Message Read Pointer File: LASTREAD.BBSU
LASTREAD.BBSU
LASTREAD.BBSU
USERON.BBS-Australian USERON file detected, compensatingU
Minimum of 
 characters required U
ELSE with no associated IFU
ENDIF with no associated IFU
Unknown User
 answered on 
 at U
Unable to create/append 
.ASW!! Unknown Questionnaire Command: "
	D	c	h	
Press S to Stop or P to Pause.&Sorry, no file areas available to you.U
2Enter file area to change to, or [Enter] to Quit: U
  OFFLINE          U
*System Error:  No Directory Path Specified
*F+System Error:  Invalid file area specified!
S stops, P pauses display.(Filename           Size  Date       Time)-------------  --------  ---------  -----
*F+System Error:  Invalid file area specified!
System Error:  Missing 
Press S to Stop or P to Pause.U
*System Error:  No Directory Path Specified
*F+System Error:  Invalid file area specified!
Enter Filename to View: 
U Invalid Filename!  Try again ...
File not found.U
*F+System Error:  Invalid file area specified!
Enter GIF Filename: 
U Invalid Filename!  Try again ...
 is not a valid GIF file!
] does not exist!	Image is 
 colors.U
&System Error:  No file path specified!
*F+System Error:  Invalid file area specified!'Enter 1-12 Character Filename to Move: 
File not found!
Move 
 to area number: +Please enter a full directory path to move 
Moving File, Please Wait ...
Overwrite Existing +Error occured while writing to target file!5Error occured while attempting to create target file!
Unable to open Source File!
Move Description Also#Moving Description, Please Wait ...	FILES.NEW
Error while moving description!
File description not moved!
 moved to U
#LZH file contains structure errors!
Error in LZH file data!U
Error in ARJ file!
 Stored 
Factor-1
Factor-2
Factor-3
Factor-4
Unknown 
#ZIP file contains structure errors!
 Stored 
 Shrunk 
Factor-1
Factor-2
Factor-3
Factor-4
Imploded
Unknown 
%&ZIP file contains errors in file data!U
	Error in 
 file!
%# file contains errors in file data!U
*F+System Error:  Invalid file area specified!
Enter Compressed Filename: 
U Invalid Filename!  Try again ...
.ARJAMust specify correct extension (ARC, ARJ, PAK, SDN, LZH, or ZIP)!
] does not exist!
Press S to Stop or P to Pause.HFilename      Length     Method   Size Now  Ratio  Date       Time   CRCM------------  --------  --------  --------  -----  ---------  -----  --------U
"Sysop error - invalid area number U
+Enter String to Look for in File Listings: 0Enter Filename to Search for (Wildcards Valid): %Enter Date to Search for [MM-DD-YY]: 
Invalid Date Format!
*F+System Error:  Invalid file area specified!
Press S to Stop or P to Pause.
  Missing File: 
	!	&	9	>	:
 , = N Y ^ | 
!$!?!D!O!e!j!o!~!
"'"8"="Z"e"j"u"z"
#$#1#6#;#P#e#p#z#
$B$G$W$e$
% %3%=%P%U%d%w%
&1&6&@&W&`&e&o&
'@'M'R'['i'
("('(C(H(k(p(
):)Z)_)
*3*M*c*
+'+E+O+b+g+v+
, ,*,5,?,V,_,d,n,
- -%-4-9->-k-p-
.$/)/6/D/^/r/w/
0,0?0I0\0a0k0
141N1c1x1
2 2%2/2?2D2N2^2c2m2|2
3p3u3
4 434F4V4h4r4
5R5\5s5}5
6#6-666;6E6U6Z6d6t6y6
9!939K9Y9^9c9x9}9
:-:<:A:O:h:
;-;8;=;X;c;m;v;
<!<3<E<\<s<
<.=<=u=
>#>/>4>U>]>
@;@@@b@q@
A/A4AYA^A
A/B>BTBdByB
C7C<C`CeC
D,D@DEDdDiDnD
ECEIENE]EnE
F;FAFFFUFfFqF
G1G6GEGJGRGWG
EXITINFO.BBS
DORINFO1.DEF
 BAUD,N,8,1U
8Invalid ERRORLEVEL specified, must be between 6 and 255.
DOS Exit from menu 
 at ERRORLEVEL U
DOS system shell from menu 
Command Line: "
EXITINFO.BBS
DORINFO1.DEF
DOS Shell Error: 
Invalid Function
File and/or Path not Found
Not enough memory"Bad environment (greater than 32k)
Illegal .EXE file format	Unknown (
Please inform the SysOp.U
Q<0u%
(<1u$
QuickBBS, Version 2.75 Ovr 
Wanted to Chat (Outside Hours)
NOTAVAIL3Sorry, but the SysOp is not available at this time.
hh:mm
Try between 
 and 
.%Wanted to Chat (Paged too Many Times)
MAXPAGE#Sorry, you can only page the SysOp 
 times per call.1Sorry, you can only page the SysOp once per call.
Please do not annoy your SysOp.
Reason for Chat? 
A Sysop:  Press [C] to chat with user or [A] to abort page request
SysOp Paged: Chatted with User
SysOp Chat Mode Now Active ...
SysOp Chat Mode Terminated ..."SysOp Paged: SysOp Aborted Request
PAGEABRT&Sorry, but the Sysop is not available.
SysOp Paged: No Response
PAGEDFSorry, but the SysOp is not available at this time.  Please try later.U
c<Au_
<Enter name or part of name to search for, <CR> for ALL users
S stops display, P will pause.GName                                City and State            Last CallM----------------------------------- ------------------------- ---------------
New City and State: 
Enter Current Password: 
Incorrect.  Password unchanged.
PASSWORD
Enter New Password: 
Password unchanged.
Re-enter for verification: #Passwords didn't match!  Try again."Please remember your new password!U
#How many lines per screen (10-66)? 
Screen length changed to 
 lines.
Screen length not changed.U
#Current home/voice phone number is 
home/voiceU
&Current business/data phone number is 
business/dataU
ISorry, the full screen editor is only available if you have ANSI enabled.'The ANSI full screen editor is now off.&The ANSI full screen editor is now on.U
&Screen clearing will not be performed.
Screen clearing activated.U
Page pausing turned off.
Page pausing enabled.U
*ANSI color/graphics will not be displayed.BANSI color/graphics option is not available at your connect speed.
ANSI color/graphics enabled.U
PHONENUM.CTL
Invalid Phone Number!U
Enter 
 phone number (XXX)XXX-XXXX: 
 phone number: 
Must Enter a Full Phone Number
 in the Form (XXX)XXX-XXXX.
+ Average System Usage by Hour for the Last 
 Days O    
O    |-------------------------------------------------------------------------|
|OAvg 
O %  
 12 01 02 03 04 05 06 07 08 09 10 11 12 01 02 03 04 05 06 07 08 09 10 11 
OAvg |-------------- AM -------------------|------------ PM -------------------|O %  | 12 01 02 03 04 05 06 07 08 09 10 11 12 01 02 03 04 05 06 07 08 09 10 11 |U
Current Time:   
Current Date:   
Connect Time:   
 Min 
Time Used:      
Remaining Time: 
Call Limit:     
You have used 
% of your time this call, with 
% left.U
Read master file 	 on menu 
Data file not found!U
USERON.BBS
Users Currently On-Line
   Baud     Location	Local    U
Send message to user on line: 
There is nobody on that line!
Sorry, 
 does not wish to be disturbed.
Sysop override: send anyhow?
Message to 	 on line 
 (maximum 3 lines)
Sending message...  
*** Message from 
Press [Enter] to continue
Sent on-line message to 
 (line 
Done!U
USERON.BBS
On-line messages 	disabled.
enabled.U
Name to use: 
Validating alias...
Sysop
System Operator%You can not use somebody else's name!
User assigned alias record #
Alias deleted.
User selected alias "
S,Please enter your date of birth [MM-DD-YY]: 
MM-DD-YY
Invalid birthday!
What is your gender (M/F)? 
Message pointers updated.U
	1	D	\	o	{	
 , D I 
!B!q!v!{!
"#"-"2"="B"T"Y"u"z"
"&#+#9#G#V#[#k#p#
$2$=$G$]$l$
%'%7%q%{%
(T(a(s(
)1)A)K)X)
*6*R*
+=+K+[+i+n+s+0,5,C,N,W,e,v,{,
-$---;-M-W-h-m-w-
.#.3.D.I.S.d.i.s.|.
/$/b/q/
/S0]0b0p0u0
11191Y1b1|1
2Y3^3q3v3
4&4/4M4V4j4v4
4!505X5g5|5
6#616>6L6W6\6a6w6
7!7&71767I7N7S7^7c7n7s7
8'8,8:8?8`8e8t8|8
:,:A:L:a:u:
;#;5;:;?;P;b;l;v;{;
;h<~<
=$=/=J=k=p=
>#>6>H>Q>o>t>
Transfer cancelled from console
Header CRC errorU
Header CRC errorU
Header data timeout
File seek errorU
(Transfer aborted due to too many errors.
uM6;E
Resending from 0Waiting for receiver to acknowledge end of file.
Resuming from 
Sending file
Session completed
Synchronizing with receiver
Unable to open 
File is a device, skipped 
Sent 
Receiver requested to skip #Receiver requested to abort sessionU
$ < t
Data CRC error
Long data packet
Data CRC error
Long data packet
Synchronizing with sender
Receiving file
Session completedU
badzfile.$$$'Not enough disk space. Session aborted.
Identical file, skipped 
Duplicate file, renamed to 
Resumed file transfer.
Unable to open  Unable to position file pointer.
Unable to create 
File is a device, skipped U
Unable to write to disk.
	Bad pos: 
Transfer cancelled
Timeout'Nonsense end of file received, ignored.	Received U
 "Protocol Engine" (PE) 1.05 (TP)U
$`<@u	
b$C4 
P%@Fpg`
RwbVr
ftGd$T
uJTZ7j
ld\EL
n6~UNt^
|eLXa
n;iL`
o/hXa
iCn4g
hWo f
n1iFa
#.#G#L#[#t#
$P$g$w$|$
%1%M%p%z%
&-&7&L&`&j&z&
(.)?)I)\)a)f)V*e*j*
*K+Z+_+
,[-n-
Fetching filename
Transfer cancelled by remote
Carrier lost
Transfer cancelled from console
Fatal timeout	CRC error
Block number mismatch
Bad block complement
Timeout, error #
Debris, error #U
Transfer cancelled by remote
Carrier Lost
Disk write error	CRC Error
Checksum Error
Block number mismatch
Bad block complement
Transfer cancelled from console
Timeout, error #
Debris, error #
Carrier lost
Transfer completedU
	|(6;
b$C4 
P%@Fpg`
RwbVr
ftGd$T
uJTZ7j
ld\EL
n6~UNt^
	$	N	a	f	x	
Transfer cancelled from console
Timeout, error #
NAK, error #$Receiver didn't acknowledge header..
Receiver didn't request headerU
Ending batch session
Sending file data
Unable to open
File is a device
Transfer cancelled by remote
Disk read error
NAK (	) error #	Timeout (
), error #
Transfer cancelled from console/Waiting for receiver to acknowledge end of file
End of file not acknowledgedU
b$C4 
P%@Fpg`
RwbVr
ftGd$T
uJTZ7j
ld\EL
n6~UNt^
	G	s	
  ACK 
  NAK U
  Can't read ,  Unable to get directory information about 
QuickBBS 2.75 Ovr
  Ready to send 
 blocks of 
  Waiting ...
  Lost carrier
  Aborted by operator
  Fatal timeout
 Sending block 
 Sent EOT                    
  Too many errors
 End of file           
 errors detected and fixed in 
 blocks.U
Short
CheckU
-TMPFILE.$$$
  Cannot create 
  Too many errors
  NAK block 
  ACK block 
  Lost carrier
  Aborted by operator
  Loss Carrier
  Receiving
 blocks of
 from 
  Write error (disk full?)
  NAK EOT            	  ACK EOT
 errors detected and fixed in 
 blocks.
UNKNOWN.$$$U
	-	8	=	B	W	k	v	
A Press [ESC] to end chat mode or [CTRL-A] to toggle capture file.
Hello 
, this is 
Capture closed at 
 Capture file closed.
CAPTURE.TXT
Capture open at 
Chatting with 
 from 
 Capture file now open.
G< rC<~w?
% QuickBBS 2.75 Ovr Split-Screen Chat 
<Esc> exit   ^A capture (OFF)	 Caller: 
 From N       CTRL-W - Clears your window - CTRL-R Re-Displays the chat Screen       
 Sysop: 
CAPTURE.LOG
Capture open at 
Chatting with 
 from U
Capture closed at 
 on U
Sysop> 
User>  U
 Capture file closed.U
EVENTCFG.DAT
hh:mm
00:00
dd-mm-yy
01-01-80U
5System Event Needs to Run, Please call back later ...U
5System Event Needs to Run, Please call back later ...
TIMEWARN
  NOTICE: 
  System event in , minutes, your time limit has been adjusted.U
 baud
Local
Security: 
 Time: 
 Line: 
 (Graphics)  
             
 (Wants Chat) 
              
 [F9]=Help
Business/Data Phone: 
  Home/Voice Phone: 
 D: 	Uploads: 
k in 
 files
Downloads: 
k today)
Times Called: 
Last Call: 
Last Caller: 
Time now: 
Total System Calls: 
  [Printer: 
  [Local Screen: 
 [PageBell: 
Chat request pending: "
No chat request pending.
Alias: 
Age:   
Sex: F
Sex: MKAlt C=Chat D=Snoop F=Flags H=HangUp J=Dos L=LockOut P=Prn S=Security T=TimeHAlt E=Edit        [Pgup], [Pgdn], [Home], [End], [F1]-[F5] Change WindowU
LIMITS.CTLU
.=`	u
** NONE AVAILABLE **
COMBINED.BBS.Combined save file not found, creating new oneU
	%	4	9	C	R	W	h	
b<SuK
 Edit user 
,[TAB] Next field, [SHIFT-TAB] Previous field:[CTRL-ENTER] to save changes, [ESC] to quit without saving
Name : 	Record : 
Location : 
Password : 
Security : 
A flags : 
Home# : 
B flags : 
Data# : 
C flags : 
Last time : 
D flags : 
Last date : 	Credit : 
Time remaining : 
Pending : 
Screen length : 
Uploads : 
Dnloads : 
Messages posted : 
UploadK : 
High msg read : 
DnloadK : 
Number of calls : 	TodayK : 
Deleted : 
Clear screen : 
Page pausing : 
ANSI graphics : 
No-kill : 
Xfer priority : 
Full screen editor : U
	2	I	Y	^	t